A survey on Indian welders
Indian Welders Welfare Association (WWF) explains as a survey of the Indian welders.
Welder – Indian welder
A welder is someone, amateur or professional, who utilizes welding equipment, particularly if they use it frequently. A welder is a tradesperson who specializes in joining materials. Not only for the Indian welders but welders around the world also does the same thing.
The term welder refers to the operator, while the welding power supply refers to the equipment.
Metals (such as steel, aluminum, brass, stainless steel, and so on) or plastic or polymer variations can be used to combine the materials. The Indian Welders must have dexterity and attention to detail, as well as a technical understanding of the materials being joined and best practices in the industry.
Welding in India – Indian welders
Welding, which comes under the industry of iron and steel industry is the second major industry in India, where the Silk and textile industry is considered at the top.
Indian Welders Welfare Association (WWF-India) is an organization, which got authorization from the Indian Government, focuses on the care of the Indian Welders.
Established in the year 2015, with its registered office at the Indian Government, it has been providing jobs or welders all over India.
Indian Welders play an important role in industrial development in India. Welding Engineering and Technology is the foundation of many industries, including
- Construction,
- Fabrication,
- Shipbuilding,
- Power generation,
- Pressure vessels,
- Underwater pipes,
- Desalination plants,
- Automobiles, and so on.
Types in Indian welding – Indian welders
In our country, Indian Welders mainly uses the three types.
They are,
MIG Welding
MIG welding is another name for Gas Metal Arc Welding (GMAW).
MIG welding is a popular high deposition rate welding technique used in India and around the world. A spool of wire is continuously fed. As a result, MIG welding is classified as a semiautomatic welding technique.
MIG Welding Benefits :
- All position capability
- Higher deposition rates than SMAW
- Less operator skill required
- Long welds can be made without starts and stops
- Minimal post weld cleaning is required
TIG Welding
Indian Tig Welding is an extremely fine and delicate welding method. For this, you’ll need to hold your torch in one hand while using a filler rod with the other. The objective is to slowly feed the filler rod into the weld as you proceed.
When TIG or GTAW, Gas Tungsten Arc Welding, you can weld without a filler rod and, understandably, just melt the two pieces of metal together. This is known as “fusing,” and it involves melting and fusing metals using the heat from an arc.
TIG Welding Benefits :
- Superior quality welds
- Welds can be made with or without filler metal
- Precise control of welding variables (heat)
- Free of spatter
- Low distortion
ARC Welding
SMAW or MMAW is the rarefied reveal for arc welding. Shielded or Manual Metal ARC Welding is what this is. This time, you utilize an electrode, which is simply a length of filler wire that is roughly 1 foot long and is covered in flux. As you use the rod, the flux will burn off, forming a shielding gas that will protect the weld.
ARC welding is also known as stick or covered electrode welding. Arc welding is one of the most common welding methods.
ARC Welding Benefits :
- Equipment used is simple, inexpensive, and portable
- Electrode provides and regulates its own flux
- Lower sensitivity to wind and drafts than gas shielded welding processes
- All position capability
Awareness for Indian Welders
According to the study, 90.7 percent of welders were aware that welding goggles/eye shields were available to protect their eyes. The same proportion of welders were aware of at least one piece of PPE. Although 75% of welders regarded noise as a problem in the workplace, only 19.7% were aware of earmuffs.
Welders‘ awareness of workplace dangers and safety practices is a serious health concern, particularly in developing nations.
To examine welders’ understanding of occupational dangers and use of safety measures in coastal South India. Cross-sectional research of 209 welders in Puducherry, South India, was carried out.
Indian Welders Welfare Association (WWF) is the one, which perfectly recognizes the Indian Welders. So, it is been providing benefits for the welders from the association, such as
- Free medical insurance
- Free welding kit
- Free Identification card
Welding as a career in India
When safety requirements are not followed, welding can be a dangerous vocation. Welders can be exposed to hazardous chemicals and gases, electric shock, fire and explosions, and other hazards if safety precautions are not taken.
Being an Indian Welder is a skilled tradesman or tradeswoman who joins metal together and fills or repairs holes in metal through the use of intense heat or gas.
They can work in many industries including industrial, manufacturing, and construction. Learn more about why welding can be a great career.
By speaking about welding in India. We should speak about a welfare, which is a Government -authorized association, focuses on the welfare for the welders throughout India. The official site is ‘http://www.welderswelfare.com/‘ . Kindly register to get many benefits during registering and in the future.